Overview

CAS (Central Authentication Service) enables single sign-on (SSO) authentication, allowing users to log into Datafor using a central authentication system. This guide provides step-by-step instructions for configuring CAS authentication in Datafor.

---

1. Accessing CAS Configuration

1. Log in to the Datafor admin panel.
2. Navigate to Settings from the left-side menu.
3. Click on CAS under System Settings.

---

2. CAS Configuration Parameters

The following fields must be configured to enable CAS authentication:

2.1 General Settings

Parameter	Description
Enabled	Toggle this option to enable or disable CAS authentication in Datafor.

---

2.2 CAS Server Configuration

Parameter	Description
Center URL	The main entry point of the CAS server. Example: http://127.0.0.1:8080/cas.
Login URL	The CAS login service URL, used to redirect unauthenticated users. Example: http://127.0.0.1:8080/cas/login.
Logout URL	The CAS logout service URL, used to sign out users. Example: http://127.0.0.1:8080/cas/logout.
CAS Implementation Type	Defines the CAS implementation type, such as jasig or another CAS-compatible protocol.

---

2.3 Access Control

Parameter	Description
Ignore List	A list of URLs that do not require CAS authentication. Multiple URLs should be separated by commas or new lines.
Include List	A list of URLs that require CAS authentication. Multiple URLs should be separated by commas or new lines.

---

2.4 User Initialization Settings

Parameter	Description
Initialize User	If enabled, new users will be automatically created in Datafor upon first login.
Initialization User Type	Defines the default user type assigned to new users. Example: Creator.
Initialization Role	Specifies the default roles assigned to new users.

---

3. Configuring CAS Authentication

Step 1: Enable CAS Authentication

• Toggle Enabled to activate CAS authentication.

Step 2: Configure CAS Server Settings

• Enter the Center URL (e.g., http://127.0.0.1:8080/cas).
• Enter the Login URL (e.g., http://127.0.0.1:8080/cas/login).
• Enter the Logout URL (e.g., http://127.0.0.1:8080/cas/logout).
• Select CAS Implementation Type (e.g., jasig).

Step 3: Set Access Control Rules

• Add URLs to the Ignore List (URLs that bypass CAS authentication).
• Add URLs to the Include List (URLs that enforce CAS authentication).

Step 4: Configure User Initialization Preferences

• Enable Initialize User for automatic user creation.
• Define the Initialization User Type (e.g., Creator).
• Assign Initialization Roles to newly created users.

---

4. Saving and Testing Configuration

1. Click Save to apply the CAS settings.
2. Perform a test login using CAS.
   • If successful: The authentication flow should redirect to the Datafor dashboard.
   • If failed: Check the CAS server settings, login URL, and CAS implementation type.

---

5. Common Issues and Solutions

Issue	Possible Cause	Solution
CAS authentication fails	Incorrect CAS settings	Verify Center URL, Login URL, and Logout URL.
User not created automatically	Auto-create user disabled	Enable Initialize User in settings.
CAS login loop	CAS session misconfiguration	Ensure the CAS session settings are correctly configured in the CAS server.

---

Conclusion

By correctly configuring CAS authentication, Datafor can integrate with a central authentication system, allowing seamless SSO login for users. Ensure all parameters are correctly set and perform test logins before deploying CAS authentication to end users.